Toyota Kirloskar Motor was recently recognized for excellence in
water management by the Confederation of Indian Industries (CII) at the third
Water Summit held at New Delhi. Toyota received the national-level award
in “within the fence” category for implementing innovative and
sustainable techniques to reduce water consumption in all the manufacturing
operations, products & supply chain activities inside the plant located in
Bidadi near Bangalore.
As a good corporate citizen, Toyota is committed towards
protecting the environment and ensuring that its automobile manufacturing
operations are safe for all including its employees, the community and the
environment. This is achieved by identifying risks and challenges at every step
of operations and continuously improving practices to reduce footprint,
increase operational efficiency with lowest energy usage guided by policies,
long term action plans and periodic reviews to achieve environmental
sustainability.
The company’s commitment is supported by some of its best
practices with the premises:
Waste Water Treatment Plant: TKM has installed water recycling system which
consists of common effluent treatment facility. Treatment of waste water for
production process is done by recycling using a membrane bio-reactor and a
reverse osmosis unit, and about 65% wastewater is recycled back to process. An
advanced in-house laboratory has been set-up with qualified analysts for
regular monitoring of quality and ensure optimum performance of the treatment
plant. This ensures that there is Zero discharge outside plant, thus zero
contamination of water bodies and the usage for freshwater only for domestic
purpose [Zero freshwater footprint at manufacturing by subjecting the effluent in
Wastewater Treatment Plant].
Rain Water Harvesting (RWH): In order to reduce the consumption of fresh
water for production houses a rainwater harvesting pond with a capacity of
25,000 cubic meters that meets their water requirements for 9-10 months. The
total surface run-off and roof top water is collected in harvesting tanks and
further processed for reuse in the production. Another pond with 25000 KL
capacity is being constructed within the plant premises. Additionally, TKM is
undertaking up-gradation of existing Rainwater Harvesting Pond storage capacity
from 25,000 cubic meters to 35,000 cubic meters to use rainwater as our primary
source at our second manufacturing plant. In fact, this RWH project at TKM will
soon lead to surplus water generation which could be diverted to the other
industries manufacturing use located in & around the Toyota plant.
Bio-sludge is
an outcome of sewage treatment process. The sludge is reprocessed using
vermicomposting techniques thereby aiming at zero hazardous waste to landfill.
The segregation of wastes and it’s disposal is achieved through authorized
vendors situated within Karnataka. Solar sludge drying facility enables to
reduce the moisture in sludge by 60%, thereby minimizing the volume of sludge
and overall reduction in the landfilling cost. Vermicomposting for utilization
of bio-degradable waste (Non-hazardous) in an eco-friendly manner and usage of
vermin-manure for our gardening purpose are in practice. Also, these
vermi-manure caters to the sapling plantation undertaken by Bidadi Industrial
Association.
The carmaker have also executed various practices to reduce
domestic water foot print which is already at a very minimal usage level.
(Domestic water footprint is about 40.5 LPCD in the last 4 years).
Expressing his delight in receiving the prestigious award, Raju
B. Ketkale, Senior Vice President - Toyota Kirloskar Motor said, “As a
responsible corporate, we at Toyota Kirloskar Motor, have been constantly
working towards the development of people, communities, and the green earth at
large. In automobile manufacturing, water is used in painting and other
processes. Therefore, even a small reduction of its impact on the water
environment is vital. Various water usage reduction initiatives that we have
undertaken inside the plant such as enhancing water recycling systems,
increased use of rain water and continuously improving processes to optimize
water usage has resulted in minimum industrial water footprint, and today we
are proud to say that we use zero fresh water in production. Such zero usage of
freshwater for manufacturing at Toyota, caters to the social needs of the
community covering more than 15,000 beneficiaries towards fulfilling their
domestic water needs
Further, we at Toyota, are committed in our endeavors to reduce
water consumption through simple and effective measures. Going forward aim to
achieve more advanced improvements with newer water reduction techniques,
recycling & rain water harvesting continuously to achieve water surplus. Fresh
water will be used only for drinking purpose.
I would like to extend my sincere gratitude to CII for
acknowledging our efforts in conserving water and motivating us further to
contribute in this front. Taking this opportunity, our request to everyone to start
inculcating culture of using each droplet of water judiciously and serve as an
example to each other, he added.”
No comments:
Post a Comment